دانلود رایگان ترجمه مقاله تکنیک جراحی استئوتومی راموس داخل دهانی عمودی – الزویر ۲۰۱۶
دانلود رایگان مقاله انگلیسی روش جراحی استئوتومی راموس داخل دهانی عمودی به همراه ترجمه فارسی
عنوان فارسی مقاله | روش جراحی استئوتومی راموس داخل دهانی عمودی |
عنوان انگلیسی مقاله | Intraoral Vertical Ramus Osteotomy Procedure and Technique |
رشته های مرتبط | دندانپزشکی، آسیب شناسی دهان و تشخیص بیماری های دهان و دندان، جراحی دهان و فک و صورت |
کلمات کلیدی | جراحی ارتوگناتیک، استئوتومی راموس داخل دهانی عمودی، روش جراحی |
فرمت مقالات رایگان |
مقالات انگلیسی و ترجمه های فارسی رایگان با فرمت PDF آماده دانلود رایگان میباشند همچنین ترجمه مقاله با فرمت ورد نیز قابل خریداری و دانلود میباشد |
کیفیت ترجمه | کیفیت ترجمه این مقاله متوسط میباشد |
نشریه | الزویر – Elsevier |
مجله | مجله بین المللی جراحی دهان و فک و صورت – International Journal of Oral and Maxillofacial Surgery |
سال انتشار | ۲۰۱۶ |
کد محصول | F553 |
مقاله انگلیسی رایگان (PDF) |
دانلود رایگان مقاله انگلیسی |
ترجمه فارسی رایگان (PDF) |
دانلود رایگان ترجمه مقاله |
خرید ترجمه با فرمت ورد |
خرید ترجمه مقاله با فرمت ورد |
جستجوی ترجمه مقالات | جستجوی ترجمه مقالات دندانپزشکی |
فهرست مقاله: مقدمه فنون جراحی برنامه ریزی قبل از عمل اماده سازی و موقعیت یابی بیمار رویکرد جراحی یادداشت های فنی عمل جراحی یادداشت های فنی گام دوم استئوتومی فوقانی یادداشت های فنی مرحله ۳: استئوتومی پایینی یادداشت های فنی مرحله ۴: پیرایش بخش پروکزیمال یادداشت های فنی یادداشت های فنی مر اقبت های پس از عمل توانبخشی و بهبود جمع بندی |
بخشی از ترجمه فارسی مقاله: مقدمه |
بخشی از مقاله انگلیسی: Introduction Intraoral vertical ramus osteotomy (IVRO) is a useful technique in the management of horizontal mandibular excess, mandibular asymmetry, and correction of minor mandibular defi- ciency. Originally performed through an extraoral approach, with the introduction of the power oscillating saw, the procedure has been performed transorally for more than 30 years. The goal of the procedure is to perform a full-thickness vertical osteotomy through the mandibular ramus posterior to the mandibular foramen with the creation of a proximal segment consisting of the condyle and posterior ramus and a distal segment containing the anterior ramus, coronoid process, inferior alveolar nerve, and tooth-bearing mandible. It is a technically straightforward procedure that can be performed efficiently and with low morbidity. This article reviews the technical considerations, technical modifications, and potential pitfalls in performing IVRO. Surgical technique Preoperative planning Horizontal mandibular excess can be addressed using IVRO with posterior positioning of the distal segment. Mandibular asymmetry, where there is an anticipated need for rotation around one ramus, can be efficiently managed with IVRO. Unilateral IVRO can be combined with contralateral sagittal split osteotomy (SSO) when correction of mandibular asymmetry dictates setback on one side and advancement on the other side. Minor mandibular advancement (1e2 mm) is permissible with IVRO with preservation of the medial pterygoid muscle attachment. Small mandibular advancements are possible because preservation of the proximal segment medial pterygoid attachment will favor forward rotation of the proximal segment and assure contact with the advanced distal segment while preserving condylar seating. Patients with symptomatic temporomandibular joint (TMJ) disorders may benefit from IVRO over SSO because of a condylotomy effect. With IVRO, muscle positioning of the proximal segment prevents unphysiologic joint loading. As with modified mandibular condylotomy, IVRO may prevent new or increased joint symptoms and possibly improve preexisting symptoms.1e3 In contrast to modified mandibular condylotomy where medial pterygoid attachment is intentionally stripped from the proximal segment to promote condylar sag, in IVRO, stripping of the medial pterygoid must be avoided to assure condylar seating and stable postoperative occlusion.4,5 There are limitations to the amount of setback that is possible with IVRO. Generally, up to 10 mm of mandibular setback can be achieved. However, in the authors’ experience with the class III Caucasian population, the requirement for mandibular setback of this magnitude is unusual and there is likely coexisting maxillary deficiency that should be addressed. Unless internal fixation is planned, the magnitude of setback is limited by the requirement to preserve the proximal segment medial pterygoid muscle attachment. Stripping of the medial pterygoid muscle to facilitate segment overlap can lead to condylar sag and bite instability at the time of maxillomandibular fixation (MMF) release. Additionally, unopposed activity of the lateral pterygoid muscle on the proximal segment can lead to condylar subluxation.4 In the authors’ experience, 5 to 6 mm of setback can be performed while keeping adequate medial pterygoid muscle attachment to obviate internal fixation. Early IVRO techniques, which did not emphasize preservation of medial pterygoid attachment, were associated with a 14% incidence of open bite after MMF release.5 Modified IVRO techniques, which preserve medial pterygoid attachment, limit this complication.6 Preservation of medial pterygoid attachment requires that the magnitude of setback is not greater than the width of the proximal segment muscle attachment. If the planned setback exceeds the width of medial pterygoid attachment, the entire muscle will be stripped with obligatory proximal and distal segment overlap. When treatment planning, it is important to remember that the greater the mandibular setback planned, the wider the proximal segment needs to be to maintain sufficient medial pterygoid muscle. Virtual surgical planning is particularly helpful in making these determinations because the amount of proximal-distal segment overlap can be viewed preoperatively, the location of the mandibular foramen assessed, and the vertical osteotomy planned accordingly. If it is determined intraoperatively that adequate medial pterygoid attachment cannot be maintained, internal fixation should be considered to ensure condylar seating and proximal segment stability. Alternatively, such cases can be planned for SSO. Internal fixation is technically more challenging with IVRO because of limited access and visibility. Right-angled instrumentation has enhanced the ability to apply internal fixation with IVRO, often obviating percutaneous access. Unless rigid internal fixation is used, a 2- to 3-week period MMF followed by 3 to 4 weeks of guiding elastic use is required after IVRO. IVRO has limited applicability when mandibular advancement is indicated. Only small amounts of mandibular advancement (1e2 mm) can be achieved without creating an unacceptable gap between the proximal and distal segments. Further, advancement of the soft tissue envelope may promote distraction of the condyle. In the setting of 2-jaw surgery, vertical ramus shortening with posterior impaction of the maxilla will enhance condylar seating and may resist the tendency for unfavorable proximal segment positioning with planned small advancements. Conversely, when posterior vertical lengthening is planned with 2-jaw surgery, soft tissue envelope distracting forces, along with mandibular advancement, may promote unfavorable condylar positioning and impact ultimate occlusal stability. When significant counterclockwise rotation of the distal mandibular segment is anticipated, as in correction of a class III anterior open bite, IVRO should be used cautiously, if at all. As noted earlier, closing rotations cause vertical lengthening of the soft tissue envelope, which promotes distraction of the proximal segment, and occlusal instability. Only small closing rotations should be considered, such as with a presurgical edge-to-edge incisor relationship. A clear consideration in choosing IVRO over SSO is the statistically significant lower incidence of neurosensory disturbance in the distribution of the inferior alveolar nerve following surgery.6e8 When considering performing 2-jaw surgery with mandible first surgery, SSO is preferred because of the relative ease of internal fixation. |