دانلود ترجمه مقاله کاربرد روشهای حساسیت در ارسال و مکان کنترل کننده سیستم انتقال جریان متناوب انعطاف پذیر facts – مجله IEEE

 

 عنوان فارسی مقاله: کاربرد روشهای حساسیت در ارسال و مکان کنترل کننده سیستم انتقال جریان متناوب انعطاف پذیر facts
 عنوان انگلیسی مقاله: Sensitivity Methods in the Dispatch and Siting of FACTS Controllers
دانلود مقاله انگلیسی: برای دانلود رایگان مقاله انگلیسی با فرمت pdf اینجا کلیک نمائید

 

سال انتشار ۲۰۱۱
تعداد صفحات مقاله انگلیسی  ۸ صفحه
تعداد صفحات ترجمه مقاله  ۲۳ صفحه
مجله  مجله ارتباطات سیستم های قدرت
دانشگاه  موسسه پلی تکنیک تروی ایالات متحده آمریکا
کلمات کلیدی  امپدانس معادل، کنترل کننده های FACTS ، تحلیل حساسیت، مدل منبع ولتاژ، مبدل منبع ولتاژ
نشریه IEEE

 

 


فهرست مطالب:

 

چکیده
۱ مقدمه
۲ تحلیل حساسیت برمبنای مدل منبع ولتاژ
A  مدل منبع ولتاژ و حساسیت
۳ تحلیل حساسیت برمبنای امپدانس معادل
A   مدل امپدانس معادل VSC
۴ کاربردها
نتیجه گیری


بخشی از ترجمه:

 

مقدمه

شبکه های انتقال برق متناوب انعطاف پذیر (FACTS) ، که بر اساس دستگاههای الکترونیکی برقی کار می کنند، قابلیت بهبود ثبات، پایداری و انتقال شبکه های برق متناوب فعلی را دارا می باشند.  این قبیل دستگاههای برقی با جریان و ولتاژ بالا، را می توان در خانواده کنترل کننده های FACTS بر مبنای VSC مبدل منبع ولتاژ پیکره بندی نمود که به صورت سیستماتیک توسعه یافته و در برنامه های صنعتی کاربرد وسیعی دارند. این قبیل کنترل کننده ها عبارتنداز کمپنزاتور(متعادل کننده) سنکرون ایستا (STATCOM) ، STATCOM (BtB STATCOM) ، کمپنزاتورهای سری سنکرون ایستا (SSSC) ، کنترل کننده های جریان برق واحد (UPFC) ، کنترل کننده های جریان برق میان رشته ای (IPFC) ، کنترل کننده های جریان برق واحد تعمیم یافته (GUPFC) و کمپنزاتورهای سری برگشت پذیر (CSC) . در مورد کار کنترل کننده های FACTS مبتنی بر VSC در شبکه نیروی بزرگ، استفاده از ابزارهای سیستماتیک و کارآمد برای تحقیق و پژوهش در مورد تاثیر VSC در مورد کار کل شبکه مفید می باشد. برای این منظور اغلب از تحلیل حساسیت استفاده می شود، زیرا رابطه تحلیلی مستقیمی بین متغیرهای کنترل و متغیرهای مشاهده شده مانند جریانات برق خط و ولتاژ گذر ایجاد می کند. در بسیاری از کاربردهای عملی از جمله ارسال واقعی VSC سری به  منظور کاهش اضافه بار خط ، این قبیل روابط مفید واقع می شوند، در شبکه نیرو نیویورک (NYPA) و عملگر شبکه مستقل نیویورک (NYISO) این وضعیت تجربه شده است. شیوه های مختلف حساسیت ، از جمله شیوه های مندرج در بخشهای  برای کنترل کننده های FACTS پیشنهاد شده اند. در این مقاله، حساسیت جریان فعال برق و واکنش ولتاژ به خاطر تزریق ولتاژ از VSC را مورد تحقیق و پژوهش قرار داده و دو روش تحلیل حساسیت پیشنهاد می کنیم.


بخشی از مقاله انگلیسی:

 

INTRODUCTION

FLEXIBLE ac transmission systems (FACTS), which arebased on power electronic devices, have the capabilityto enhance the stability and transfer capability of existing acnetworks. These high-voltage, high-current power electronicdevices can be configured into a family of voltage-sourced converter(VSC)-based FACTS controllers which have been systematicallydeveloped and installed for industrial applications.These controllers include static synchronous compensators(STATCOM) [1], back-to-back STATCOMs (BtB STATCOM)[2], static synchronous series compensators (SSSC) [3], unifiedpower flow controllers (UPFC) [4], interline power flow controllers(IPFC) [5], generalized unified power flow controllers(GUPFC) [6], and convertible series compensators (CSC) [7].In the operation of VSC-based FACTS controllers in a largepower system, it is desirable to have a systematic and efficienttool to investigate how the VSCs can impact the operation ofthe whole system. Sensitivity analysis is often used for this purpose,because it sets up a direct analytical relation between thecontrol variables and observed variables, like line power flowsand bus voltages. Such relations are useful for many practical applications, including real-time dispatch of the series VSC torelieve line overload, which has been practiced by New YorkPower Authority (NYPA) and New York Independent SystemOperator (NYISO).Various sensitivity approaches, including those in [8]–[۱۳],have been proposed for FACTS controllers. In this paper, weinvestigate the sensitivities of the active power flow and voltageresponse due to the voltage injection from VSCs, and proposetwo sensitivity analysis methods. One approach is an analyticalsensitivity formulation [14] with the VSC modeled as aninjected voltage source [15]–[۱۸]. This approach computesdirectly the incremental bus voltages and line flows from theperturbations of the VSC variables. The other approach is anindirect approach, which models the VSC as an equivalentimpedance insertion [19], [20]. Then the sensitivity can befound by computing the variations of the network variableswith respect to line impedance perturbations. Both approachesare first-order linear expansions and can provide approximatesolutions without extensive computation. The indirect methodhas the advantage of including the effect of a FACTS controllerin the power system, without actually building a FACTS controllermodel. Thus it is especially suitable for the sensitivitycomputation of FACTS controllers in a large number of locations.The sensitivity algorithm has been incorporated in theEPRI/NYPA FACTS Controller Operator Training Simulator[21] and applied to a 1673-bus power system. The analyticalsensitivity method is illustrated in two practical applicationsfor shifting line flows using a UPFC and two separate SSSCs.The equivalent impedance method is illustrated as a series VSC siting problem.This paper is organized as follows. Sections II and IIIintroduce the injected-voltage-source-model-based and equivalent-reactance-model-based sensitivity formulations, respectively.The practical applications of sensitivities in a 1673-bussystem [22] are discussed in Section IV. The conclusion issummarized in Section V.II. VOLTAGE SOURCE MODEL-BASED SENSITIVITY ANALYSISA. Voltage Source Model and SensitivitiesWith this method, a VSC is modeled as an injected voltagesource. As an example, consider a UPFC applied to the systemin Fig. 1(a), where the series VSC is inserted between Buses 1and 2. The circuit representation is shown in Fig. 1(b), where theshunt voltage insertion is and the series voltageinsertion is . The reactances and arethe reactances of the shunt and series transformers, respectively,which are assumed to be lossless. When any one of the variables, and are changed, all the state variables of the system will change accordingly, affecting the power flow on alltransmission lines.where is the vector of the VSC controller setpoints, and isthe vector of all the voltage variables of the network, includingthe variables of the FACTS controllers. The VSC setpoint equation(the third row) depends on the type and regulation mode ofthe FACTS controllers [22], [23].At any operating condition satisfying the bus power injectionsand VSC setpoints according to (18), the bus injectionsubject to small perturbations of is given by (19). Given thatthe power injections are fixed, that is, and ,the voltage variable perturbation can be solved from the VSCperturbation as in (20)


 

 عنوان فارسی مقاله: کاربرد روشهای حساسیت در ارسال و مکان کنترل کننده های FACTS
 عنوان انگلیسی مقاله: Sensitivity Methods in the Dispatch and Siting of FACTS Controllers

 

دانلود رایگان مقاله انگلیسی

 

خرید ترجمه فارسی مقاله با فرمت ورد

 

خرید نسخه پاورپوینت این مقاله جهت ارائه

نوشته های مشابه

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

دکمه بازگشت به بالا